-
Product List
＃ RF Antenna & Deactivator
------------------------------------------
＃ RF Electronic Board
------------------------------------------
＃ RF Label
------------------------------------------
＃ Magnetic Tag Detacher
------------------------------------------
＃ Hard Tag
------------------------------------------
＃ AM Label
------------------------------------------
＃ AM Detacher
------------------------------------------
＃ EM Antenna & Deactivator
------------------------------------------
＃ EM Label/Library Strip
------------------------------------------
＃ Bottle Tag
------------------------------------------
＃ Ink Tag / Pin
------------------------------------------
＃ Special Security Tag
------------------------------------------
 
     
     
     
     
     
  EM Desktop Checker(IM-EMD03)
     
   
     
     
     
  Product Descriptions  
         
    * Usage: To detect electronic magnetic strip.
* The machine consist of main controller and detection board. The 2parts need to be put in the area within 0.5m

* How To Use:
1. Connect the wire and open the power switch
2. After reactivating the strip in book or merchandise, check it across the detection board all around. The machine will alarm if the the strip is magnetic. No alarm means the strip is deactivated or damaged.

* Notes:
1. Turn off the machine after using it.
2. The machines should be install 2M away from the em system, controller and computer.
* Dimension: 258*308*12mm Weight: 2.5kg
* Frequency: 50Hz
* Input Voltage: AC 220V Output Voltage: AC 9V
* Signal processing mode: 0.3W Alarm rate: 99.8%
* Standard work time: 60000Hrs
* Detection height: 80mm(Cobalt strip 16cm)
* Distance between detection board and antenna: Over 200mm